Skip to main content
Ribbon Cutting Desk Search

Ribbon Cutting Photos: Shot List, Poses and Framing

Good ribbon cutting photos come from a plan: a short shot list, a photographer standing where the building or sign shows behind the cutting party, guests kept behind a marked line and a pause after the cut. Brief the photographer on the cue, pose the group once, and confirm photo notice and permission before sharing.

Photographer crouched in front of a ribbon across a doorway with a small group of guests lined up behind it

Photos are the lasting record of a ceremony, and most of the work happens before the cut. This page covers the shot list, the framing and the position of the photographer. It fits inside the main ceremony guide and the planning checklist; timing for the photo slot is in the run of show. It also works for a groundbreaking.

What shots do you need?

You need about ten shots, planned in advance. Give the photographer this list.

  • Setting. A wide shot of the entrance and the crowd before the program.
  • Welcome. The host speaking.
  • Speakers. One clean shot of each speaker, facing the camera.
  • Line-up. The cutting party gathering.
  • The cut. Several frames before, during and after.
  • Reaction. Applause and faces in the crowd.
  • Posed group. Everyone looking at the camera.
  • Details. The sign, the entrance, hands together.
  • Arrivals and conversation, if you want a candid set.
  • Staff and team in a group.

How do you frame the cut with the building behind?

Put the entrance or sign behind the cutting party, and stand where both fit in the frame. Shoot slightly from the side or low enough that the sign is visible above the heads. Avoid a position where the sun is behind the group, which leaves faces dark; if you cannot avoid it, move the group.

Tips:

  • Leave space around the group so the shot can be cropped for different uses.
  • Check the background for bins, cars and clutter, and move them before the event.
  • Take horizontal shots for most uses and a few vertical ones for narrow placements.

Where does the photographer stand?

In front, centered and a few steps back, with a clear line to the group. Agree two positions: a main one for the cut and a second at an angle for variety. A helper keeps the guest line behind the photographer.

The host should know where the photographer is and tell the cutting party to look at the camera, not at the ribbon, for the posed shot.

How do you pose and position a group?

Pose once, and keep it fast. Put the tallest people at the back or edges, the guests of honor at the center, and everyone close together so faces are visible. Ask people to turn slightly toward the center, and to hold the ribbon-cut position until the photographer says thanks.

  • Count to three, take several frames.
  • Check the shot on the camera screen before the group disperses.
  • Ask everyone to remove sunglasses for one frame, if appropriate.
  • Give the group clear instructions with a friendly tone and a firm time limit.

What are phone and low-light tips?

If you are shooting on a phone, do these things.

  • Clean the lens.
  • Hold the phone steady with both hands and take several frames.
  • Tap on the main face or the group to set focus and exposure.
  • Do not zoom with the screen; step closer or crop later.
  • In low light, use a nearby light source and keep still; avoid flash at close range if it flattens faces.

Take a test shot at the venue earlier in the day to see what the light does.

How do captions, permission and sharing work?

Caption every photo you share, and decide the notice and permission rules before the event. A caption states what, where, when and who, left to right, with titles. Check names and spellings.

The University of Minnesota says a signed release is generally not required for photography in public spaces or at public events where it is not plausible to get signed consent from attendees. It also says a release is needed when an individual or group is the primary focus or the images are used for promotion or marketing. It also says to post clear signage at event entrances stating that photography and videography are taking place, with a meaningful way to opt out. This is one university’s guidance for its own communications, not a universal rule; other organizations have different rules, and yours may too.

What are the photo-release basics?

This is general information, not legal advice. Check your own and your venue’s rules.

  • Minors. The University of Minnesota says a release is required when minors under 18 are photographed or filmed and that prior written parental or guardian consent should always be obtained.
  • Signage. Put a clear notice at the entrance, and name someone guests can tell if they prefer not to be photographed.
  • Opt-out. Honor requests, and keep those guests out of the frame where you can.
  • Press and chamber photographers may have their own rules; ask them.
  • Store the answers with your event file.

See also the opening-day page for where the cut sits in the wider day, and the groundbreaking invitation for notifying guests in advance.

People also ask

Where should the photographer stand?

In front of the ribbon, facing the cutting party, far enough back to include the building or sign behind them and low enough to keep faces in view. Choose a spot with the sun behind or beside the photographer, not behind the group. Ask guests to stay behind a marked line so nobody steps into the frame.

How many shots do you need?

A short list covers it: a wide shot of the setting, the speakers, the line-up, the moment of the cut, the reaction and applause, a posed group and a few of the crowd. Take several frames at each moment, because blinks happen. Quality of framing matters more than total number, so plan the list in advance.

Should we pose the cut?

Do both. Capture the live cut as it happens, then, while the group is still lined up, ask them to hold position and do a second pose with everyone looking at the camera. The posed version is usually the one used in announcements. Tell guests of honor in advance so the second pose does not feel awkward.

Do guests need to sign a release?

Not always. The University of Minnesota says a signed release is generally not required at public events where signed consent from attendees is not plausible, but it requires a release when individuals are the primary focus, when material is used for promotion or marketing, and for minors, and it recommends clear entrance signage with a way to opt out. Your own rules or your venue's may differ, and this is not legal advice.

What do you caption it?

State what happened, where and when, then name the people in the photo from left to right, with titles. For example: the opening of [place], [date], with [names] cutting the ribbon. Check each name and title spelling with the person. Do not guess identities, and leave out anyone who asked not to be named.

Our sources

  1. Photo and Video Releases (University of Minnesota Office of Communications) (umarcomm.umn.edu)